Countertops

Collection
About this collection

Countertops

Prefabricated vanity tops with the counter, backsplash and sink in one finished piece. Six widths, four finishes.

Skip to results list

Active filters:

0 items
Column grid
Column grid

Filter

Active filters:

No products found.

Try using fewer filters, or clear all filters.

Every top on this page arrives finished: the counter, the backsplash and the bowl are one piece, sized to a standard vanity and drilled for the faucet. What is left to decide is width, finish and whether you want one sink or two. This is how to work through those three choices without ordering samples of everything.

Start With Width, Not Finish

Finish is the fun part, so it is tempting to start there. Width is the decision that actually constrains you, because these are made to set sizes and are not trimmed on site. Measure the vanity cabinet across the front, ignore the old counter, and match it to the nearest size on this page. A 36 inch vanity takes the VT36, which measures 37 inches so it overhangs slightly on each side.

If your measurement lands between two sizes, the cabinet is probably an older or custom build. Send us the number before ordering. Going up a size and letting it overhang further is sometimes fine and sometimes not, depending on whether a wall or a door casing is in the way, and that is worth two minutes of checking rather than a return.

One Bowl or Two

The choice only exists at 61 inches. Below that every top is a single bowl, positioned centrally.

Two bowls suit a bathroom where two people are getting ready at once and the second sink genuinely removes friction. What you give up is the middle of the counter, which is where most people put everything they actually use. A single bowl in the same 61 inch top leaves a long clear run beside it, and in a guest or family bathroom that surface tends to be more useful than a second drain.

Both configurations cost the same to install and occupy the same footprint, so decide it on how the room gets used in the morning rather than on resale logic.

Living With a Quartz Surface

These tops are engineered stone, which behaves differently from a natural slab in ways that matter day to day in a bathroom.

  • Non-porous. The surface does not absorb water, so it will not take a stain from toothpaste, soap or makeup left overnight. It also means no annual sealing, which a natural marble vanity does need.
  • Wipes clean. Warm water and a mild cleaner is genuinely all it wants. Skip abrasive pads and anything strongly alkaline like oven cleaner, which can dull the polish over time.
  • Not heatproof. Rare in a bathroom, but hair styling tools are the exception. A straightener left face down on any stone surface can mark it, so give it a mat or a folded towel.
  • Consistent pattern. Because the material is engineered, the top you receive will look like the swatch. A natural stone slab varies piece to piece, which is part of its appeal but makes ordering unseen a gamble.

For a fuller background on how engineered stone is made and how it compares with granite and solid surface, the Natural Stone Institute publishes consumer guidance that is not tied to any one manufacturer.

Matching a Top to the Vanity Below

The four finishes here are all in the white to light grey range, which is deliberate. A vanity top is a small surface in a small room, and a busy pattern that would read well on a kitchen island can feel loud across 25 inches.

Against a white or dove vanity, Cloud keeps things quiet and lets the hardware and mirror carry the room. Moonstone adds enough movement that the counter reads as stone rather than a plain slab, without competing with anything. Against a painted color, navy, forest green or a warm greige, Desert Silver and Miami Vena both hold their own, and the veining gives the eye somewhere to land.

If you are ordering a bathroom alongside a kitchen, our cabinet color range is the easiest way to keep the two rooms speaking to each other. A shared hardware finish does more for that than a matching cabinet color.

Good to Know

  • The faucet hole is predrilled at 1-3/8 inches, sized for a single hole faucet. Pick the faucet with that in mind, or ask us before ordering if you have a widespread set in mind.
  • Bowl size depends on the finish. Cloud and Moonstone are 16-1/8"W x 11"D. Desert Silver and Miami Vena are 17"W x 11-13/16"D, and 16"W x 11-1/2"D on the 61 inch double.
  • The backsplash is 4 inches and comes attached. If you are tiling to the ceiling you can still use it, or tell us and we will confirm the options.
  • Set the vanity level first. Stone does not flex, so an uneven cabinet shows as an uneven counter and, at worst, as stress on the top. Shim before the top goes on, not after.
  • These ship in 2 to 4 weeks. Order the top with the vanity so they land together.
  • Coverage differs from the cabinets. The Fabuwood cabinet warranty covers the cabinets and states it does not extend to products installed in connection with them, countertops included. Ask us and we will confirm what applies to the finish you pick.

Ordering, and What We Will Check for You

You can order any top on this page directly. If you would rather have a second pair of eyes on it first, send the vanity width and the finish you are leaning toward and we will confirm the size is right and flag anything about the layout worth knowing.

For a full bathroom, a free 3D design prices the vanity, the top and any moldings as one itemized list, so you see the real total rather than assembling it from separate quotes. If you want to see the finishes in person first, our door samples cover the cabinet colors, and we can advise on which top pairs with the one you choose.

Questions about a specific size or finish are welcome. Contact us and we will get you a straight answer, including current lead time on the exact top you want.